Easy to Assemble Wooden Pegboard Organizer with house Functional
Peg
Product Paramenters
Material | HDF/MDF/ Hardboard |
| Size | 1200*2400mm or customized |
| Thickness | 3-30mm |
| Hole Distance | >=3mm |
| Hole Diameter | 4mm~20mm |
| Color | White, Black, Browm, etc/ soild color/ wood grain color |
| Surface | Melamine paper/ painting/PVC/ UV /PU Paper |
| Grade | E0, E1, E2 |
| Delivery Time | 15 days |
| Usage | To accept pegs or hooks to support various items |
Single Sided E0 MR MDF
Single Sided E0 MR MDF is a highly moisture resistant MDF, sanded
smooth on one side and bonded on the other side with a hard wearing
white melamine surface.
Single Sided E0 MR MDF is manufactured for the membrane pressing
and painted panel market. To cater for the unique requirements of
various vinyl membrane pressing and paint application techniques,
there are two Single Sided E0 MR MDF
board substrates available to choose from:
• Single Sided E0 MR MDF (735kg/m3 ), and
• High Density Single Sided MDF (770kg/m3)
Single Sided E0 MR MDF is a wood based panel and reacts to changes
in moisture like natural timber, ie. high or low humidity may cause
some expansion or contraction without any degradation to the
strength of the board.
Single Sided E0 MR MDF is recommended for interior use only.
Pegboard with accessories
Fusion Lock and an interlocking design with male and female prongs
that provide a secure fit for adding additional pegboard sections
for more storage space.
Holds 50 lbs of evenly distributed weight, if properly installed.
Includes 15 built-in standoffs to space pegboard perfectly away
from the wall.
Ideal for garages, basements, workshops and craft rooms.Built-in standoffs
-Fusion Lock ensures a perfect mount when you add another
-Pegboard left or right,above or below
-Perfect for any room in the house
-Easy to assembly
-All installation hardware included
Conventional painting of MDF Raw
Surface preparationStop all nail holes and imperfections with a suitable timber filler
and acrylic blade filler and allow to dry. Lightly sand all
surfaces to
be coated so as to obtain a smooth and even finish. Dust off all
sanded surfaces using a damp rag before painting commences.
Undercoat
For conventional painting, the recommended type of undercoat or
primer is a water based acrylic type. Apply the coating in
accordance with the manufacturer’s instructions. When dry, all
painted surfaces should be sanded smooth. It is recommended that
acrylic undercoats should not be watered down prior to use.
Topcoat
Ideally, an acrylic coating is selected as the top coat. However,
as some formulations in this generic type can be found to be
unsuitable in certain applications, as in the case of doors and
architraves of high wear areas, an oil or alkyd base type may be
more suitable.
Application of topcoat
To achieve the best appearance in finish, spray application is
recommended to be carried out in as dust free circumstances as
possible. Conventional brush and roller applications can also give
a satisfactory result.
